Towards improving shell and beam finite elements

Phill-Seung Lee

Investigation of the fatigue damage in a half through steel Lohse bridge

Takahito Kojima*, Toshihiro Okumatsu, Shozo Nakamura, Takafumi Nishikawa

Feasibility Study on the Intelligent Bridge with an Advanced Monitoring System

and Smart Control Techniques

Ayaho Miyamoto, Minoru Motoshita

Corrosivity evaluation for each structural part of steel deck truss bridge

before and after dam construction

Young-Soo Jeong*, Shigenobu Kainuma, Takehiro Imamura

Dynamic behavior of cables of cable-stayed bridge isolated with SCFP placed under pylon

Barbaros Atmaca, Muhammet Yurdakul*, ?evket Ate?

Investigation for corrosion characteristic of structural members

on unpainted weathering steel bridge

Masashi Michino*, Shigenobu Kainuma, Yuya Yamamoto, Young-Soo Jeong,

Yasushi Fujioka, Akira Warashina, Shinichiro Takagi, Masahiko Uchino

Investigation on correlation and acceleration coefficients of accelerated corrosion tests to

atmospheric exposure tests

Junji Kobayashi*, Shigenobu Kainuma, Young-Soo Jeong

Corrosion Protection Effect with Sacrificial Anode for Corroded Steel Members

using Al-Zn Casting Alloy and Fiber Sheet

Yohei Tshuchihashi*, Shigenobu Kainuma, Young-Soo Jeong, Shuji Ishihara,

Daisuke Uchida, Akira Kaneko

Tunneling influence zones for existing piles of bridge approach

Trin Detkhong, Kisada Trakoonjannak, Pornkasem Jongpradist*

Quantitative of uncertainties in Earth Structures

Stefanos Drakos*, Gyan Pande

A Study on Composite Material for Drain Pipe in Subsea Tunnel

Doo-Rae Kim, Kang-Hyun Kim, Kyeong-Cheol Kim, Jong-Ho Shin*

Horizontal shear strength on various PC types of composite beams

Jung-Il Suh, Chul-Goo Kim*, Hong-Gun Park, Geon-Ho Hong, Su-Min Kang

Design Concrete Members with High Strength Steel Reinforcements

Felicia*, Susanto Teng

Failures of Slabs Having Low Flexural Steel Ratios Subjected to Punching Loads

Khatthanam Chanthabouala*, Susanto Teng

Punching Shear Analysis of Reinforced Concrete Flat Plates

Osman Mohamed Ramadan, Kamal Ghamry Metwally*, Gehad Samir Younis

Optimum Location/Area of PZT Actuators for Flutter Dampin Using Norm Feedback Control

Gain-Based Iterative Method

Sallam Kouritem, Mohamed Elshabasy, Hassan El-Gamal

Influence of cross beam spacing on Load distribution factor at girder bridges

Hyo-Gyoung Kwak*, Joung Rae Kim

Uniform annual failure rates spectra for post-tensioned structures

J. Luz Rivera, Sonia E. Ruiz, Arturo López-Barraza, Alfredo Reyes-Salazar, Eden Bojorquez

Proposed recommendations for the design of reinforced concrete beams with openings

Osman Mohamed Ramadan*, Kamal Ghamry Metwally, Wafaa Mohamed Shaban

Parameter Identification of Hyperelastic and Hyper-Viscoelastic Models

Yi Feng Wu*, Ai Qun Li, Hao Wang

Stiffened composite panels with cut-outs: Strategies for modelling compressive response

Igor Guz

Experimental Construction of a Temporary Church in Reinforced Ice

Jan Belis*, Arno Pronk, Kenny Martens, Bert Van Lancker, Jonas Dispersyn

The Effect on Compressive Strength of Fly Ash-Based Geopolymer Concrete

with Crumb Rubber Replacing Fine Aggregates

Yeonho Park, Ali Abolmaali*, Pranesh Aswath, Swoo-Heon Lee

Determination of Design Parameters by Seepage Pressure Induced Hanging Bag Test

Hyeong-Joo Kim, Kwang-Hyung Lee, Jeong-Hoon Joo, Tae-Woong Park, Jay Cabrera Jamin

Physical Vulnerability Characteristics of Buildings by Numerical Simulation of Debris Flow

Hyo-Sub Kang*, Ananta Man Singh Pradhan, Barsha Pradhan, Yun-Tae Kim

Volume estimation and assessment of debris flow hazard in Mt Umyeon, Seoul

Ananta Man Singh Pradhan*, Hyo-Sub Kang, Barsha Pradhan, Yun-Tae Kim

A study on the generation of stress and strain in geotextile tube by scale model test

Hyeong-Joo Kim, Myoung-Soo Won, Jang-Baek Lee, Min-Jun Choi, Jay Cabrera Jamin

The Turbulent Wake of a Square Prism with Wavy faces

Y.F. Lin, H.L. Bai*, Md. Mahbub Alam

Effect of Flow Impingement on the Acoustic Resonance Excitation

in a Shallow Rectangular Cavity

Ahmed Omer, Atef Mohany*, Marwan Hassan

Interference between Two Tripped Cylinders in a Cross Flow

Md Mahbub Alam

Vortex induced vibration of an inclined finite-length square cylinder

Gang Hu*, K.T. Tse, K.C.S. Kwok

Simulations of Fluidelastic Forces and Fretting Wear in U-Bend Tube Bundles of

Steam Generators: Effect of Tube-Support Conditions

Marwan Hassan, Atef Mohany

Aerodynamics of a cylinder in the wake of a V-shaped object

Sangil Kim*, MD Mahbub Alam

Bending of a circular plate with stiff edge lying on a soft functionally-graded elastic layer

under the action of arbitrary axisymmetric loading

Sergey S. Volkov, Alexander N. Litvinenko, Sergey M. Aizikovich, Yun-Che Wang, Andrey S. Vasiliev

Plastic behavior of circular discs with temperature-dependent properties

containing a solid inclusion

Yun-Che Wang*

Orthotropic yield criteria based on crystallographic orientations

and their effect on the development of plastic zones in thin discs

Yaroslav A. Erisov, Sergei V. Surudin*

Analysis for Pull-in Voltage Variations of Fixed–Fixed Beam

with Elastic Deformation in Current Input

Wan-Chun Chuang*, Jia-Yi Lin

Effect of white layer on the distribution of stresses and strains

in thin annular discs subject to internal pressure

S. Alexandrov*, F. Grechnikov, N.D. Kien

Effect of Pressure-Dependence of the Yield Criterion on Residual Stresses

in Rotating Annular Discs

Woncheol Jeong*, Kwansoo Chung

Effect of glass-fiber rods on the ductile behaviour of reinforced concrete beams

Mohamed A. El Zareef*, Mohamed E. El Madawy

A modified boundary treatment in the Incompressible SPH for accurate pressure calculation

on the solid boundary

Nur`Ain Idris*, Mitsuteru Asai, Yoshimi Sonoda

Finite element and neural network model of electrical capacitance sensor

to simulate the pipelines suffer from internal corrosion

Wael A. Al-Tabey*

Characteristics of Pedestrian Level Wind Environment

in Twisted Wind Flow around Isolated Buildings

X. Zhang*, A.U. Weerasuriya, K.T. Tse, K.C.S. Kwok

Finite element simulations on residual stresses in roller bending hollow section steel members

Jin Yanfei, Chiew Sing Ping, Lee Chi King

Analysis of Cracks in Isotropic Linear Elastic Half-space

Under Various Boundary Conditions by Weakly Singular SGBEM

Tien Ngoc Pham, Jaroon Rungamornrat*, Withit Pansuk, Yasuhiko Sato

Design feasibility of double-skinned composite tubular wind turbine tower

Taek Hee Han*, Gil-Lim Yoon, Jin-Hak Yi, Deokhee Won

Influence of pile-soil-interaction on natural frequency of

bottom-fixed offshore wind turbines considering material uncertainties

Jin-Hak Yi*, Sun-Bin Kim, Taek Hee Han, Gil-Lim Yoon, Lars Vabbersgaard Andersen

Dynamic reliability analysis of offshore wind turbine support structure under earthquake

Gee Nam Lee*, Dong Hyawn Kim, Yongjei Lee

Reliability analysis of laterally loaded pile for an offshore wind turbine support structure

Gil-Lim Yoon, Sun-Bin Kim*, Jin-Hak Yi, Jun-Hwan Lee

Vibration-based damage identification in wind turbine tower by FBDD method

Tuan-Cuong Nguyen, Jae-Hyung Park, Thanh-Canh Huynh, Jeong-Tae Kim

Use of fibers with large fracture strain and low elastic modulus

for flexural strengthening of RC beams

Donguk Choi*, Myung-Kwan Lim, Sorrasak Vachirapanyakun, So-Young Kim

Investigation of Angle Welded Connection under Tension by Full-scale Tests

Aphinat Ashakul*, Opas Mekpramual

Structural Analysis of a Beam with Two Fixed Ends Using Screw Theory

Hongliang Shi*, Yongsik Kim

A thorough investigation of the interdependent behavior of prestressed system

Thuy Thi My Nguyen*, Chi Kin Iu

Numerical Simulation of Bullet Impact for Rotorcraft Fuel Cell Assembly based on SPH

Hyun-gi Kim*, Sungchan Kim

The Thermo-Mechanical Behavior of Micro Circular Diaphragm Measured

by means of the Bulge Test Technique

Wael A. Al-Tabey*

Maximizing Oil Recovery for CO2 Huff and Puff Process in Pilot Scale Reservoir

Moon Sik Jeong*, Kun Sang Lee

Risk Analysis and Simulation for Geologic Storage of CO2

Kwang-Seok Chae*, Jea-Woo Lee

CO2 Sources and Future EOR Prospects in Sumatra Island-Indonesia

Muslim Abdurrahman, Wisup Bae*, Seongil Kim

Overview of CO2-EOR Operation Plan in Meruap Field

Joo Yong Lee*, Asep K. Permadi, Hyun-Tae Kim, Dae-Gi Huh, Jong Myung Park,

Wonsuk Lee, JaeHyoung Lee, Yongchan Park, Taewoong Ahn, Taehoon Lee, Kyoung buk Lee

Feasibility study and process development of CO2 EOR surface facilities

Donghyun Yun*, Yi-kyeung Ko, Hye-sun Yi, Dong-Hun Kwak, Jin-Kuk Kim

Minimum Miscibility Pressure Calculation for CO2 Injection Flooding

Based on Oil PVT Properties

Ria Ayu Pramudita, Won S. Ryoo*

Design and Dynamic Simulation of a CO2 Injection System for CO2 Enhanced Oil Recovery

Felicia Salim, Minji Lee, Won-Sik Kim, Jaihyo Lee, In-Won Kim*

Finite element modeling of failure in steel moment connection

subjected to ultra-low cycle fatigue loading

Milad Afzalan, Mehdi Ghassemieh*

Derivation of Fatigue Properties of Plastics and Life Prediction for Plastic Parts

Sun-Ho Park*, Chun-Myung Park, Jun-Hyung Kim, TaeHan Kim

Non-linear model of stress relaxation curve at high temperatures of Gr. 91 steel

Woo Gon Kim*, Jae Young Park, Hyeong Yeon Lee

Application of an explicit dynamic method for discontinuous analysis

by using rigid bodies–spring model

Tadao Yagi*, Norio Takeuchi

Three-dimensional numerical simulation of the dynamic interaction

between high-speed trains and a steel-truss arch bridge

Qing Zeng*, Elias G Dimitrakopoulos, Cheuk Him Lo

The effects of the viscosity parameters on the barrel type helical rod

Merve Ermis*, Nihal Eratl?, Hakan Argeso, Akif Kutlu, Mehmet H. Omurtag

The dynamic responses of a viscoelastic conical helical rod

Merve Ermis*, Nihal Eratl?, Mehmet H. Omurtag

Flow Characteristics of Unit Artificial Reefs in 3-D Placement Models

Dongha Kim, Sol Han, Quynh Thi Ngoc Le, Won-Bae Na*

Characteristics of Artificial Reefs at Installation Stages

Sol Han, Dongha Kim, Quynh Thi Ngoc Le, Won-Bae Na*

Dynamic buckling study of laminated composite stiffened plates

Shuvendu Narayan Patel*, Peri Adinag Abhishek, R. Deepthi Reddy, Nikam Amol S.

Topology optimization of laminated composite plates with isotropic and orthotropic material

Dongkyu Lee*, Doan Quoc Hoan, Luu Anh Tuan, Kihak Lee, Jaehong Lee

The Levitating Ring Restaurant Tower

Jaacov Bloch, Yossi Amir*, Guy Austern

Optimal Control of Cable Vibration using MR Damper based on Nonlinear Modeling

Tingting Liu*, Hongwei Huang, Limin Sun

Experimental investigation on the distribution of along-wind loading

on a high-rise building with rectangular section

Jiadong Zeng*, Mingshui Li, Shaopeng Li

An efficient method to choose basic vectors for equivalent static wind loads

of long span roofs

Nan Luo*, Haili Liao, Mingshui Li

Analysis of Heavy-weight Floor Impact Noise and Vibration of Concrete Slabs

in a Residential Building

Gil-Ok Baek*, Dae-ho Mun, Hee-Kab Han, Hong-Gun Park

FE Meshing Scheme for Accurate Placement/Area of PZT Actuators

for Flutter Damping Using LQR Method

Sallam Kouritem, Mohamed Elshabasy, Hassan El-Gamal

Applying the enhanced Craig-Bampton method to equilibrium protein dynamics

Jaehoon Kim*, Jin-Gyun Kim, Giseok Yun, Do-Nyun Kim

Applying Computational Dynamics Method to Protein Elastic Network Model

Jae In Kim*, Kilho Eom, Sungsoo Na

Performance of the enhanced Craig-Bampton method

Jin-Gyun Kim*, Seung-Hwan Boo, Phill-Seung Lee

Modeling Capability of Continuum Mechanics Based Beam Element

Hyo-Jin Kim*, Kyungho Yoon, Do-Nyun Kim, Phill-Seung Lee

Convergence behavior of the MITC3+ triangular shell element

Youngyu Lee*, Phill-Seung Lee

Reducing the membrane locking in the MITC4 shell element

Yeongbin Ko*, Phill-Seung Lee

Fire design of composite beams with web openings protected

with reactive intumescent coating

Shixiong Guo*, Jifeng Yuan

Diamond Shape Monopole

Ashok Natu, Paresh Mestri, Anju Singh*

“Blind Analysis” of an Equivalent Tall Building Subjected to Long Period Ground Motions

Eric Yee*

Design Guidlines for Semi-Rigid Steel-Concrete Composite Frames

Senthilkumar Rajendran, Satish Kumar S R

Structural behavior of yielding shear expanded metal panels

Carlos Graciano, Paulo Teixeira, Gabriela Martinez

The influence of weld geometry on plastic strain history in cyclic loading – a parametric study

Albano de Castro e Sousa*, Alain Nussbaumer

Static and buckling analysis of plates using spline finite strip method

with modified amending schemes

Ajeesh S.S.*, S. Arul Jayachandran

Fatigue Damage of a Half-through Concrete-filled Steel Tubular Trussed Arch Bridge in China

Qu Wang, Shozo Nakamura*, Baochun Chen, Qingxiong Wu

Required patch plate thickness for corrosion-damaged steel piled jetty

to recover its seismic performance

Kazuo Furunishi*, Yasuo Kitane, Yoshito Itoh

Finite element analysis of local buckling of steel-concrete continuous composite beams

Khatir Abdelwahhab*, Tehami Mohamed

Bond strength in full-scale concrete-filled steel tubular columns

Tian-Yi Song*, Zhong Tao, Brian Uy, Lin-Hai Han

Concentrically loaded slender high strength box columns

Mahbub Khan*, Brian Uy, Zhong Tao, Fidelis Mashiri

Application of Eurocode 4 to blind bolted endplate composite joints with CFST columns

Tai H. Thai*, Brian Uy

Parametric studies on the bahaviour of beam-column flush end plate connections

using blind bolts

Rumman Waqas, Brian Uy, Tai Thai

Behaviour of demountable CFST column-column connections

Dongxu Li*, Brian Uy, Vipulkumar Ishvarbhai Patel

The Effects of Post Weld Heat Treatment on the Mechanical Properties of

Tempered Martensite and High Strength Steel Welded Joints

Umut Yasar Uzunali, Hamdullah Cuvalci

Mechanical properties of multiple large-diameter corrugate steel pipes in embankment

Huan He*, Shi-Sheng Zhou, Wen-Xue Gao, Hong-Liang Deng

A study on pipe connector for multi-beam box girder bridges

Won-Ho Heo*, Chi-Young Jung, Hyun-Min Lee, Se-Jun Park, Sang-Hyo Kim

Modelling for the effect of welding process on buckling of built-up

high strength steel box column

Jin Jiang*, C.K. Lee, S.P. Chiew

A Study on Structural Performance of Composite Column using the L-shaped molded steel

and Template to Lattice Composite Beam for Slim Floor Connection

Kyong-Soo Yom*, Duck-Ki Pyo, Sung-Mo Choi*

Innovative Composite Concrete Filled Plastic Tubes in Compression

Walter Odhiambo Oyawa*, Naftary K. Gathimba, Geoffrey N. Mang’uriu

Structural Assessment of a 66 kV Overhead Power Transmission line tower built

with Polymer Composite Material

Munusamy Selvaraj*

Residual strength of Y-type perfobond rib shear connectors to cyclic load on highway bridge

Kun-Soo Kim*, Sang-Hyo Kim, Min-Kyu Lee, Sejun Park

Influences of Rehabilitation Material Parameter on Existing RC Parapets

Qiu Jinkai, Wu Xiang-guo*, Jiang Hongbin

An Experimental Study on The Positioning of Shear Connectors In

Steel-Concrete Composite Beams

T. Valsa Ipe*, H Sharada Bai

Shear Behaviour of Innovative Connectors in Partially Encased Column

Shahrizan Baharom*, Emad Hossienpour

Numerical study of shear lag of high strength steel bolted and welded angles

Yuhao Xiong*, Angus Chi Chiu Lam, Michael Chi Ho Yam, Kwok-fai Chung

Seismic Evaluation of a Steel Moment Frame with Cover Plate Connection

Considering Flexibility by Component Method

Mehdi Ghassemieh*, Alireza Bahadori

Seismic evaluation of Hybrid steel frames with different patterns of semi-rigid connection

M. Ghassemieh, N. Vahedi

Calibration of the CDP model parameters in Abaqus

Szczecina Micha?*, Winnicki Andrzej

Numerical analysis for the fire-induced progressive collapse of a RC frame structure

Mengzhu Diao, Lanping Qian, Yi Li, Xinzheng Lu*, Hong Guan

Compensation method for prediction of the adiabatic temperature rise of

concrete from semi-adiabatic device

Gyeong-Hee An*, Jin-Keun Kim

Investigating the load carrying capacity of RC undamaged and damaged beams

strengthened with CFRP

Yaqub M.Y. Rafiq*, Jake Spearman, Mahdi Al-Farttoosi

Restoration of Pre-damaged RC Bridge Columns with Deficient Plastic Hinge Regions

Using Basalt FRP

Mohamed F.M. Fahmy*, Zhishen Wu

Overestimation of ITZ thickness around polygon-shaped aggregate

Zhigang Zhu*, Huisu Chen

Modeling Test of Shear Connectors between Precast Concrete Members

to Infill the Gap Interface

Sung-yong Yu*, Geun-Taeck Song, Soo-Kyoung Ha, Hyun-Seok Song, Guk-Won Son

A Bi-axial Failure Envelop for Concrete under High Strain Rate Conditions

Hyo-Gyoung Kwak*, HanGul Gang

Crack progress analysis of plain concrete test prisms by HPM

Atsushi Kambayashi*, Yoshihiro Fujiwara, Norio Takeuchi, Tadahiko Shiomi

Fresh Concrete subjected to rainfall - Level of formwork to concrete surface effect

Ahmed S. Elamary*, B.T. Alsulami, Nidal M.W. AL-Bustami

Dynamic centrifuge test and BNWF analysis on piles in dry sand

Jungin Choi

Dynamic mechanical responses of concrete under the influence of extreme loads

Seongwon Hong, Thomas Kang*

Large scale smooth particle hydrodynamics model for analytical fragility curves

of a building subject to tsunami

Fritz Sihombing*, Marco Torbol

Seismic behavior of full-scale beam-column knee Joints

Byung Un Kwon*, Ah Sir Cho, Tae-Soo Oh, Thomas Kang

Evaluation of steel fiber-reinforced concrete panel`s impact resistance

using existing impact performance prediction models

Sanghee Kim, Thomas Kang*

DFT-MD-CM combined multiscale mechanics on the opto-mechanical behavior

of polymer network

Maenghyo Cho*

Selection of sensor location for structural system identification using degree

of freedom-based reduction method

Heejun Sung*, Seongmin Chang, Maenghyo Cho

Dynamic condensation for design optimization and probability-based analysis

Seongmin Chang*, Maenghyo Cho

Dynamic Characteristics of Thin-Walled Composite Beams Subjected to Electromagnetic

and Thermal Fields

Sang-Yun Park*, Ohseop Song

Molecular dynamics simulation model for the photo-responsive polymer

and its nanocomposites

Joonmyung Choi, Hayoung Chung, Jung-Hoon Yun, Maenghyo Cho*

(Invited) Dislocation formation mechanism in Si-Ge core-shell nanowires - molecular dynamics

study

HyungGyu Lee, Keonwook Kang*

A Study on the Tailoring of Interfacial Shear Strength between Graphene and Polymer

by Addressing Defects in Graphene

Seunghwa Yang*, Hyewon Han, Sujin Yun, Hyunsung Shin, Maenghyo Cho

Multiscale analysis on the toughening behavior of thermoplastic modified epoxy

J.-G. Han, H. Shin, B. Kim, M. Lee, J. Park, M. Cho*

A study on the multiscale strategy of polymer nanocomposites consisting

of agglomerated fillers

Hyunseong Shin, Joonmyung Choi, Seunghwa Yang, Seongmin Chang, Maenghyo Cho*

A numerical study to investigate the effect of carbon nanotube (CNT) entanglement

on the electrical behavior of nanocomposites

B.J. Yang, K.J. Cho, G.M. Kim, H.K. Lee*

The Variant Identification in Molecular Dynamics Simulations for Shape Memory Alloys

Jo-Fan Wu, Chia-Wei Yang, Chuin-Shan Chen, Nien-Ti Tsou*

Transformation Behavior and Pseudoelasticity of Aged Ti50Ni25Cu25 Shape Memory Ribbon

Chih-Hsuan Chen, Hsin-Kai Wang, Shyi-Kaan Wu*

Dynamical phase-field modeling of one-dimensional ferroelastics under temperature

and strain cycling

Yun-che Wang*

(Invited) Cement modeled as poly-dispersed assemblage of disk-like building blocks

Denvid Lau*, Zechuan Yu

Extreme viscoelastic and coupled-field properties of composites containing ferroelastic

inclusions

Yun-che Wang*

Can we map the fracture force from nanoindentation into the strength

of graphene under tensile loading?

Jihoon Han, Nicola Pugno, Seunghwa Ryu*

Full atomistic simulations of normal and brittle bone collagen: molecular origin

of brittle bone disease

Shu-Wei Chang*, Buehler J Markus

Failure modes and probabilistic evaluation of vortex-induced vibration for bridges

Lingyao Li*, Zhiwu Yu, Yaojun Ge, Hanyong Xu, Xuhui He

Parametric numerical study of wind barrier shelter

Marijo Telenta*, Milan Batista, M.E. Biancolini, Ivan Prebil, Jo?ef Duhovnik

Folding behavior study of polystyrene sheet activated by light

Yonghee Lee*, Maenghyo Cho, Taesoon Hwang

Molecular dynamics simulation model for the photo-responsive polymer

and its nanocomposites

Joonmyung Choi, Hayoung Chung, Jung-Hoon Yun, Maenghyo Cho

Multiscale modeling to characterize interfacial behavior and interphase

of crosslinked epoxy nanocomposites

Byungjo Kim*, Joonmyung Choi, Seunghwa Yang, Suyoung Yu, Maenghyo Cho

Comparative analyses of conventional prestressed beams and smart prestressed beams

Weiwei Xu*, Yi Yang

Mechanical analysis of carbon fiber shape memory polymer composites

Seok Bin Hong*, Jin-Gyun Kim, Yong-Youn Nam, Geun Ho Lee, Woong-Ryeol Yu

Shaking table tests of bending-shear vibration model with magneto-rheological fluid damper

Kotaro Hokari*, Hideto Kanno, Tetsuya Nishida

Development of Crack Detection System with Unmanned Aerial Vehicles

and Digital Image Processing

Jong-Woo Kim, Sung-Bae Kim, Jeong-Cheon Park, Jin-Won Nam*

Nonlinear ultrasound inspections for structural prognosis

Choon-su Park*, Seunghyun Cho, Dae-chul Seo, Jun-woo Kim

Delay-and-Sum Beamforming Technique on Ultrasonic Propagation Imaging System*

Yunshil Choi, Jung-Ryul Lee*, Donghoon Kang, Eric B Flynn

Dynamic properties of sandwich beam integrating shear thickening fluid

under harmonic excitation

Minghai Wei*, Gang Hu, Li Sun, Kun Lin, Dujian Zou

An anisotropic ultrasonic transducer and its application

Wensong Zhou*, Hui Li, Fuh-Gwo Yuan

An Efficient Method for Galloping Profile Monitoring of Power Transmission Lines

by Use of an Inertial Unit: Theoretical and Experimental Investigation

Zhong-Bin Lv, Qing Li, Yi-Qing Ni*, Qin Huang, Wang-Lin Wu, Chao Zhang

Long-term monitoring and analysis of hanger vibration of a high-speed railway steel truss

arch bridge

Youliang Ding, Yonghui An*, Chao Wang

Monitoring of structural dynamic behaviors by vision-based system

Xiao-Wei Ye, Chuan-Zhi Dong*, Tan Liu

Novel bolt-loosening detection technique using image processing for bolt joints

in steel bridges

Jae-Hyung Park, Tae-Hwan Kim, Kwang-Suk Lee, Tuan Cuong Nguyen, Jeong-Tae Kim*

Damage detection of cable-stayed bridges based on the variation of stay cable forces

eliminating environmental temperature effects

Chien-Chou Chen*, Wen-Hwa Wu, Chun-Yan Liu, Gwolong Lai

Experimental Study of GFRP Reinforced Concrete Bridge Deck

Jeong-Rae Cho*, Young-Hwan Park, Sung Yong Park, Sung Tae Kim

Transfer Length in Pretensioned Prestressed Concrete Beam using High Strength PS Strand

Jin Kook Kim*, Jun Mo Yang, Hong Jae Yim

Probabilistic fatigue life updating for bridges based on comprehensive

structural monitoring data

Young-Joo Lee*

Experimental study on flexural strength of precast deck with ribbed loop joints

Dong-Ho Shin*, Se-Jin Park, Hyun-Chul Oh, In-Gyu Kim, Young-Jin Kim

Detection of tensile force relaxation through eddy current measurement

of a pre-stressing strand

Ji-Min Kim, Jun Lee, Hoon Sohn*

Cyclic Tests on Prefabricated Bridge Piers

Changsu Shim*, Sangyong Lee, Sungjun Park, Chandara Koem

A new model updating technique based on kriging surrogate model for bridge structures

Ho Yeon Jung*, Jung Hoon Lee, Seung Seop Jin, Hyung Jo Jung

A Test Operation and Development of User–Based Health Monitoring System

for Cable Supported Bridges

Hyun-Jun Jung, Jin-Woo Jung, Goang-Seup Zi, Tae-Hwan Yang, Dae-Joong Moon*

Application of Response estimation on Bottom-Fixed Offshore Structures

Rajendra Prasath Palanisamy, Soojin Cho, Sung-Han Sim*

Concrete cure monitoring using piezoelectric admittance measurements

Wan Cheol Kim*, Hye Jin Jo, Gyuhae Park

Development of wearable haptic interfaces for impact detection on UAV wing structures

Myung Jun Lee*, Hwee Kwon Jung, Gyuhae Park

Repetitive control mechanism of disturbance rejection using basis function feedback

with fuzzy regression approach

Jeng-Wen Lin*, Chih-Wei Huang, Pu Fun Shen

Crack Detection of Underwater Concrete Beams Using Ultrasonic Surface Waves

Shahrizan Baharom*, Nadom K. Mutlib, Ahmed El-Shafie

Fatigue damage monitoring of an airplane wing using active-sensors

Jun Young Jeon*, Hwee Kwon Jung, Gyuhae Park

Prestress Force and Moving load Identification on Prestressed Concrete beam based on

Virtual Distortion Method

Ziru Xiang*, T.H.T. Chan, D.P. Thambiratnam, Theanh Nguyen

Operational modal analysis using forced excitation and input-output autoregressive

coefficients

Kyeong-Taek Park*, Marco Torbol

A self-adaptive firefly algorithm for structural damage detection

Chu-Dong Pan, Ling Yu*

Temperature-effect compensation for prestress-loss monitoring in PSC girders using

mountable PZT interface

Thanh-Canh Huynh, Kwang-Suk Lee, Tuan-Cuong Nguyen, Jeong-Tae Kim*

Seismic Design Implications for Low-to-moderate Seismicity Regions from Earthquake

Simulation Tests on RC Building Structures in Korea

Han-Seon Lee*

Fundamental Concepts of Performance Based Earthquake Engineering

Haluk Sucuoglu*

Generation of earthquake ground motions at dam sites based on numerical simulation of wave

propagation from source

Jin-Ting Wang*, Chun-Hui He, Luo Gan, Chu-Han Zhang

Estimation of liquefaction using Hachinohe geotechnical information and upgrade of that

system

Yutaka Hashizume*, Naoki Oyama, Kenji Kaneko

An Alternative Probabilistic Seismic Hazard Assessment Method in Areas of Low-to-Moderate

Seismicity

Nelson Lam*, Hing Ho Tsang, Elisa Lumantarna, John Wilson

Optimal seismic retrofit design for residential structures using CLT panel and FEMA P-807

methodology

Sangki Park*, John W. van de Lindt, Sea-Hyun Lee

Practical implementation of generalized pushover analysis for multimodal pushover analysis

Firat Soner Alici*, Kaan Kaatsiz, Haluk Sucuo?lu

Simplified Seismic Assessment of Confined Masonry Buildings Based on Displacement

Fariman Ranjbaran*, Amir Reza Kiyani

Deformation behavior of cohesive soil ground forced large displacement by the dip-slip

reverse fault

Naoki Oyama*, Kazuki Yamaguchi, Yutaka Hashizume, Kenji Kaneko

Behavior of RC Walls with Different Steel Grades and Aspect Ratio of 2.0

Jang-Woon Baek*, Hong-Gun Park, Sang-Jun Yim

Relationship between hardness and plastically deformed structural steel elements

Hassan Nashid, Charles Clifton, George Ferguson, Micheal Hodgson, Chris Seal, Jay Hyouk Choi

Influence of bond types on brick masonry strength

Takahiro Taguchi*, Carlos Cuadra

Estimation of vibration characteristics of traditional Japanese wooden shrines considering

frictional supports

Yusuke Saito*, Carlos Cuadra

Lateral Load Testing of Two Existing Masonry Buildings

Baris Binici*, Alper Aldemir, Erdem Canbay, Ahmet Yakut

Comparison of seismic performance of RC precast fabricated shear wall with different infilled

opening

Ximei Zhai*, Wenbo Hu

Actuator controller interface program for pseudo-dynamic hybrid simulation

Hu Zhan, Oh-Sung Kwon*

Seismic damage prediction of wooden house using predominant period of ground

Hayato Nishikawa*, TomiyaTakatani

Seismic assessment and base isolation of free-standing monumental marble columns

Camilla Bitossi, Elena Mori, Stefano Sorace, Gloria Terenzi

Seismic evaluation and retrofitting of reinforced concrete buildings with base isolation

systems

Lazaros Vasiliadis

Seismic retrofit performance of one-story wooden structure using 3-D collapsing analysis

Tomiya Takatani*, Hayato Nishikawa

A New Methodology in Seismic Torsion Design of Building Structures

Han Seon Lee*, Kyung Ran Hwang

Fragility Analysis of an in-Service Hysteretic Reinforced Concrete System Subjected to

Seismic Actions

Vincent Z. Wang*, Sam Fragomeni

Effects of Building Asymmetry in Areas of low-to-Moderate Seismicity

Nelson Lam*, John Wilson, Elisa Lumantarna

Structural condition of Peruvian heritage architecture to resist earthquake actions

Carlos Cuadra*

Reliability analysis of Integral Abutment Bridge under Seismic Load

Narges Easazadeh Far, Majid Barghian

Seismic and progressive collapse potentials of low-rise soft-story RC frames and

strengthening strategy

Shuang Li*, Xiaomin Wang, Sidi Shan, Changhai Zhai, Lili Xie

Alternative seismic hoop details for reinforced concrete columns in low rise buildings

Chul-Goo Kim*, Hong-Gun Park, Tae-Sung Eom, Tae-Wan Kim

Single and multi-material topology optimization to retrofit beam-column connection using

CFRP composite

Hoang Dang-Vu, Kihak Lee*, Dongkyu Lee

Lateral Force-Resisting Capacities of Reduced Web-Section Beams: FEM Simulations

Seungpil Kim*, Myoungsu Shin, Mark Aschheim

Seismic performance of steel intermediate moment frames according to building heights

Sang Whan Han*, Yu Jin Park, Sung Jin Ha

Behavior of steel fiber-reinforced cementitious composites under direct tension and flexure

Seongwoo Gwon*, Seungpil Kim, Eunjong Ahn, Myoungsu Shin

Generalized force vectors for analysis of torsionally coupled systems

Kaan Kaats?z*, F?rat Soner Al?c?, Haluk Sucuo?lu

Analytical Investigations on Seismic Responses of a 25-story RC Flat-Plate Core-Wall Building

Structure

Kyung Ran Hwang*, Han Seon Lee

Seismic Performance Evaluation of Coupled Steel Plate Shear Wall in 3-Story Structures

Kangmin Lee*, Keunyeong Oh, Sungbin Hong, Yang Yang, Jaehyuk So

Numerical simulation of earthquake response of multi-storey steel frame with SIM infill panels

Zhiyu Wang*, Yuri Totoev, Adrian Page, Willy Sher, Kun Lin

Seismic assessment of existing under-designed reinforced concrete buildings retrofitted with

friction devices

Ioannis E. Kavvadias, Angeliki S. Koureli, Lazaros K. Vasiliadis*

Seismic response of 3D steel buildings with welded and post-tensioned connections

Alfredo Reyes-Salazar, Manuel E. Soto-López, Sonia E. Ruiz, Edén Bojórquez, Juan Bojórquez

Design of integral abutment bridges for combined thermal and seismic loads

Narges Easazadeh Far*, Shervin Maleki, Majid Barghian

Novel Ocean System for High Density Mass Production of Seaweed Biomass in Korea

Hyun Chung*, Nam-Gil Kim, Kook-Jin Choi, Hee-Chul Woo

Shock Response Analysis of Blast Hardened Bulkhead in Naval Ship under Internal Blast

Sang-Gab Lee*, Hwan-Soo Lee, Jae-Seok Lee, Gul Gi Choi

An optimal arrangement method of blast hardened bulkhead for surface warships

using a simplified vulnerability evaluation

Youngsu Choi, Seungkyun Yeo*, Hyun Chung

Dynamic material properties of marine steels under impact loadings

Sang-Rai Cho*, Sung-Il Choi, Seong-Kyung Son

Development of Design and Validation Technology for Blast Hardened Bulkheads

Yong Yook Kim*, Gul-Gi Choi, Yang Sub Na, Soonhung Han

A new concept of blast hardened bulkheads: feasibility study of aluminum foam attached BHBs

Sung-Ho Kim, Gul-Gi Choi*, Phill-Seung Lee

Numerical Simulation of the buckle propagation problem in deepwater pipelines

Ye Tianyuan, Bingqi Liu*, Menglan Duan, Zhongyun Guo, Chen An

The structure design of type-C independent tank on LNG ship

Yao Yao, Zhongyun Guo*, Menglan Duan, Li Zhou, Bingqi Liu

Risk analysis of subsea x-mas tree leakage

Yaohua Guan, Jianmei Luo*, Menglan Duan, Sidian Huang

Risk analysis of subsea jumper in installation period based on fuzzy FMEA

Hong-Ping Tian, Li Zhou*, Menglan Duan, Zhongyun Guo

Numerical Parameter Study on Lateral Buckling Response of Submarine Pipe-in-Pine pipelines

Xinhu Zhang*, Menglan Duan, Tongtong Li

The analyses of rocket anchor’s penetrating speed in installation and its influencing factors

Wei Yang, Kai Zhang*, Yu Zhang, Runhong Tian, Menglan Duan

The experimental study of the strength of bonded pipeline under tension loadings

Linsong Song*, Saisai Ouyang, Yu Zhang, Chaowei Zhong, Menglan Duan

The Crack Growth Simulations Using XFEM of Composite Riser Bonded Joint in Deep Water

Jianjun Wang, Peizhen Wu*, Yu Zhang, Menglan Duan

Dynamic Response of Free-Span Submarine Pipelines: Integral Transform Solution

Jing Cao, Tongtong Li*, Wei Liang, Menglan Duan, Jijun Gu, Chen An

Field test research on failure of photoelectric composite submarine cable

under impaction by dropped anchors

Xu Jia, Qiang Gao*, Liping Wang, Menglan Duan, Tao Zhang

Physics-based simulation of offshore installation operations

considering ocean environmental loads and operating conditions

Dong-Hoon Jeong*, Myung-Il Roh, Seung-Ho Ham, Luman Zhao, Hye-Won Lee, Sol Ha

A study of the diameter influence on the fluid force of two tandem cylinders

Zhenhua Song*, Menglan Duan, Jijun Gu

Analytical study of the failure mode and pullout capacity of suction anchors in sand

Haixiao Liu*, Jinsong Peng, Yanbing Zhao

Study on the settlement reduction of artificial reef

Yong-Soo Ha, Dae-Ho Yun, Ananta Man Singh Pradhan, Barsha Pradhan, Yun-Tae Kim*

Influence of Wave Approach Angle on Square TLP’s Behavior in Random Sea

Ashraf mohamed Abou-Rayan*, Ossama Hussien

Area-preserving Deformation of 3D Objects

Zhiwei Li, Kin-chuen Hui*

Improvement of crashworthiness of bus structure under frontal impact

Pattaramon Jongpradist*, Supakit Senawat, Burawich Muangto

Self-intersection Avoidance for 3-D Triangular Mesh Model

Habtamu Minassie Aycheh, Min Ho Kyung